BST-16031 is suitable for bursting strength test of various kinds of foil, paper etc, especially in pharmaceutical and food industries.

Principle

BST-16031 is based on Mullen theory, the piston injects silicon oil into the chamber covered by plastic membrane which contacts with the test sample continuously until the sample bulges to break, the maximum pressure is just the result of bursting strength.

Standards

ISO 2759, TAPPI T807, TAPPI T810, GB/T1539, GB/T454, QB/T1057, YBB00152002-2015

Applies to plastic films, laminated films, extrusion films, foils, sheets, rubber, paper, paperboard, wood, brake pad, tyres, windshield wiper, conveyor belt, hare, metal, carbon rod, catheter, artificial skin etc testing of static coefficient and dynamic coefficient, especially used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions.

Standards

ISO 8295, ASTM D1894, TAPPI T816,GB 10006

Applies to plastic films, laminated films, extrusion films, foils, sheets, rubber, paper, paperboard, wood, brake pad, tyres, windshield wiper, conveyor belt, hare, metal, carbon rod, catheter, artificial skin etc testing of static coefficient and dynamic coefficient, especially used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions.

Standards

ISO 8295, ASTM D1894, TAPPI T816,GB 10006

ETT-1501 Elmendorf Tearing Tester is professionally designed for the tearing test of films, sheets, paper, cardboard, waterproof films, woven materials, textiles and nonwovens.

Standards

ISO 6383-1-1983, ISO 6383-2-1983, ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414, GB/T16578.2-2009, GB/T 455

This instrument is professionally applicable to the determination of heat shrinking performance and dimensional stability of various films, heat shrinkable tubes, hard PVC films for tablets, and back-sheets in the fluid medium at different temperatures.

Standards

GB/T 13519, ASTM D2732

This instrument is suitable for the highly accurate and digital measurement of heat shrinking force, shrinkage ratio and contracting force of various heatshrinkable films. Usually film samples include stretch film, blown film, shrink wrap, battery separation membranes, etc.

Standards

ISO 14616, DIN 53369

For the determination of gross leaks in flexible packaging containing a headspace gas by bubble emission method.

Standards

ASTM D3078, GB/T 15171

For the professional test of peeling force and bond strength Of various kinds of flexible laminated plastics or equivalents.

Standards

ASTM D3330, GB/T 25256, GB 8808, GB2792

FIT-1701 Pendulum Impact Tester is professionally applicable to the determination of resistance to impact-puncture penetration of films, sheets, composite films, aluminum foils and other materials.

Standards

GB 8809-88、ASTM D3420、NF T54-116

For determining the ability of packages to withstand internal pressurization. For determining the minimum burst strength of a seal placed around the perimeter of a flexible package as it is internally pressurized and enclosed within restraining plates. For the measurement of leaks in nonporous film, foil, or laminate flexible pouches and foil sealed trays, which may be empty or enclose solid product.

Standards

ASTM F2054, ASTM F1140, ASTM F2095, ISO 11607-1, ISO 11607-2, GB 18454、GB 19741, GB 10440, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00162002, YBB 00252005

PRT-2201 Rub Tester is professionally designed for abrasion resistance of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force and poor hardness of coating layers of printed materials.

Standards

GB 7706

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

Standards

ASTM D3654, PSTC 107, GB 4851, JIS Z0237

For determining the ability of pressure-sensitive tapes to remain adhered under constant load applied parallel to the surface of the tape and substrate.

Standards

ASTM D3654, PSTC 107, GB 4851, JIS Z0237

For the measurement of the comparative tack of pressure-sensitive adhesives by a rolling ball and is most appropriate for low-tack adhesives.

Standards

GB 4852, JIS Z0237, ASTM D3121

This thickness tester is based on contacting method and designed to precisely measure thickness of plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.

Standards

ASTM D645, ASTM D374, ASTM D1777, TAPPI T411, ISO 4593, ISO 534, ISO 3034, GB/T 6672, GB/T 451.3, GB/T 6547, DIN 53105, DIN 53353, JIS K6250, JIS K6328, JIS K6783, JIS Z1702, BS 3983, BS 4817

It is used for evaluating the torque retention of continuous thread closures on containers, and measuring the torque required to tighten or unscrew the closure from a container.

Standards

ASTM D2063, ASTM D3198, ASTM D3474, GB/T 17876, BB/T 0025

Applies to plastic films, sheets, rubber, laminated films, extrusion films, foils, paper, medical patches, release paper, non-woven fabrics etc testing of various items, such as tensile, break force, elastic modulus, elongation, seal strength, T-style peeling strength, 90 peeling strength, 180 peeling strength, widely used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions.

Standards

ASTM D882, ASTM D828, ASTM E4, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, GB1040, GB8808, GB4805, GB7753, GB 7754, GB 453, GB/T17200, GB/T16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, JIS P8113, QB/T2358, QB/T 1130