Plastic Testing Machine
HTM Series Type A up to 30MPa
HTM series type A hydrostatic and burst testing machine features compact structure design and simple to use. It is specifically used for time-to-failure test of plastic pipe under constant internal pressure, and for test of resistance to short-time hydraulic pressure of plastic pipe, tubing, and fittings.
Standards
GB/T 6111, GB/T 15560, GB/T 18997.1, GB/T
18997.2, ISO1167, EN921, ASTM F1335, ASTM
D1598
HTM Series Type B up to 500MPa
This type of hydrostatic and burst testing machine features compact structure design and simple to use. It is specifically used for time-to-failure test of plastic pipe under constant internal pressure, and for test of resistance to short-time hydraulic pressure of brake hose assembly, high pressure hose assembly, metallic pipe and fitting, and pressure vessel, gas cylinder and etc.
Standards
GB/T 16897, GB/T 7127.1, GB/T 7127.2, GB/T 241,
GB/T 9251, GB 15385, ISO3996, ISO 6120
Water Tank & End caps for Plastic Pipe
Please contact weehuat.tay@revsolutiontest.com for technical specification.
Ring Stiffness Testing Machine (for Large Pipe)
The ETM type R Series with larger test space is specifically designed for plastic pipe ring stiffness testing. Equipped with suitable test grips and fixtures, it can address the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems are suited for tension and/or compression applications with load range requirements from 30kN to 100kN. They are typically used for quality control and production testing.
HDT/Vicat Softening Testing Machine
This series of HDT/VICAT testing machine is mainly used to determine temperature of deflection under load and Vicat softening temperature of thermoplastic plastics, pipes and fittings.
Standards
ISO2507, ISO75, ISO306, ASTM D648, ASTM D1525
GB/T 8802, GB/T 1633, GB/T 1634
Melt Flow Indexer
This type of melt flow indexer is a high precise melt testing instrument for the measurement of melt flow rate (MFR)/(MI) or melt volume rate (MVR) in quality control and research applications. The testing result can distinguish the viscous flow performance of thermoplastic material by the model MFI452 showing its advantage in the following industries: factories, products quality testing station, scientific and research institutes, and concerned industries.
Standards
ISO1133, ASTM D1238, ASTM D3364, BS2782, DIN53735, JIS K7210