Wance Testing Machine
Pendulum Impact Testing Machine
This series is widely used for Izod and Charpy impact test on plastics and plastic pipes. Equipped with tensile impact pendulum and fixtures, it can carry on tests on plastic film and sheet. Newly designed model offers the most cost-effective configuration to address Charpy test from 1J to 50J, and Izod test from 1J to 22J.
Standards
ISO 179, ISO 180, ISO 8256, ISO 9854.1, ASTM D256, ASTM D1822
The basic model consists of a heavy solid steel base on which the specimen holder (anvil) and a heavy-duty cast steel upright are mounted. The machine is constructed with main frame, driving system, pendulum lock/release system, angle encoder, display, protection shield and other accessories.
Standards
ASTM E23, ASTM E1820, ASTM E2298,
ISO 148, EN10045, ISO 14556, ZF 15-53, ISO 11343, JIS Z 2242, GOST 9454-78
Impact on metals, Charpy, both non-instrumented and instrumented
Servo motor driven pendulum can stop at any position, realizing different angle/energy impact test for R&D use
Equipped with cooling system, I can perform low temperature test down to -180°C
Standards
ASTM E23, ASTM E1820, ASTM E2298,
ISO 148, EN10045, ISO 148, EN10045, ISO 14556, JIS Z 2242, GOST 9454-78
This series is specially used for Charpy impact test on plastic pipes (PVC,PPR, etc.).
Standards
ISO 9854.1, GB/T 18743
This series is widely used for Izod and Charpy impact tests on plastics. Equipped with suitable pendulums and fixtures, it can carry on tensile impact on plastics, impact tests on plastic pipe and cast iron materials. WANCE offers the most cost-effective configuration to address Charpy test from 1J to 50J, and Izod test from 1J to 22J.
Standards
ISO 179, ISO 180, ISO 8256, ISO 9854.1, ISO 148.1,
ASTM D 256, ASTM D1822
This series of pendulum impact testing machine addresses the needs of performing Charpy tests on metallic materials, fully complying with ISO, EN, ASTM and other international standards. PIT-C series provides the user high quality at the most affordable price, with impact energy ranging 150J, 300J and 450J.
Standards
ISO 148, EN10045, ASTM E23, GB/T 229, GB/T 12778
This machine is used for measuring the Charpy impact resistance of metal and other materials.
Standards
ISO 148, EN10045, ASTM E23, GB/T 229,
GB/T 12778, GOST 9574
This type of testing machine is specially used for dynamic tear testing (DT test) of metallic materials.
Standards
ASTM E604, GB/T 5482
This type of machine is used for the DWTT test on the ferrite steel, pipeline steel and other metallic materials. DWTT impact energy is measured under dynamic loading, to judge impact-resistance performance of the specimen, and to observe the specimen fracture surface in their temperature transition region from non-ductility to ductility. It is widely used in research and development of high specification thick pipeline steel and ferrite steel.
Standards
ASTM E436, GB/T 8363, API RP 5L3
